120W Switching mode power supply

PRODUCT > Power adapter > 120W Switching mode power supply

120W Switching mode power supply

■ Features
·INPUT:100-240VAC 50/60Hz
·Output: 5-48V, 0.3-7.5A
·Global certificates
·No load power consumption<0.21W
·Cooling by free air convection
·MTBF: 30000 hours
·Provide 3 years warranty
·Install fuses on both ends of the Input and Output for double safety
·Protections: Short circuit / Over load / Over voltage / Over temperature
·Meet CEC,DoE Level VI,Energy star.
·Certification: UL,ETL,CUL,GS,CE,BS,SAA,KC,PSE,CB,FCC,EMC,RoHS。

Model：

MCNT1207000 MCNT1207500 MCNT2404000 MCNT2405000 MCNT3603000 MCNT4802000

Product details

SPECIFICATION
OUTPUT	MODEL NO.	MCNT1207000	MCNT1207500	MCNT2404000‍‍‍‍‍	MCNT2405000‍‍	MCNT3603000‍	MCNT4802000
	OUTPUT VOLTAGE	12V	12V	24V	24V	36V	48V
	OUTPUT CURRENT	0-7A	0-7.5A	0-4A	0-5A	0-3A	0-2A
	OUTPUT POWER	84W	90W	96W	120W	108W	96W
	PFC (MIN.)	0.6	0.6	0.6	0.6	0.6	0.6
	RIPPLE & NOISE (max.)	120mVp-p	120mVp-p	240mVp-p	240mVp-p	360mVp-p	480mVp-p
INPUT	INPUT VOLTAGE	100 ~ 240VAC
	FREQUENCY	50 / 60Hz
	INPUT POWER	NO LOAD: 0.21W MAX AT INPUT 100-240VAC 50/60Hz . LOADING : 100W MAX , AT RATED OUTPUT .
	TEMPERATURE RISING	CASE 65 ℃ MAX FOR RATED OUTPUT
	EFFICIENCY (MIN)	88%
	DIELECTRIC WITHSTAND TEST	5mA 3000VAC FOR 60 SECOND BETWEEN INPUT AND OUTPUT INPUT AND CASE, AT AN ALTERNATIVE POTENIALS 5% HIGHER MAY BE APPLIED FOR 1 SECOND
PROTECTION	OVER LOAD	THE PRODCT INCLUDES CURRENT FUSE TYPE 250V 3A LOCATED WITHIN INPUT CIRCUIT
	SHORT CIRCUIT:	CAPABLE OF WITHSTANDING CONTINUOUS SHORT CIRCUIT AND RECOVER AUTOMATICALLY
ENVIRONMENT	WORKING TEMP	THE OPERATIN TEMPERATURE OF THE PRODUCT SHALL BY FROM -29 ℃ TO +45 ℃
	STORAGETEMPERATURE	THE STORAGE TEMPERATURE OF THE PRODUCT SHALL BY FROM -40 ℃ TO +75 ℃
	RESISTANCE TO HEAT	WHEN TESTED WITHIN 10 MINUTES AFTER PRODUCT HAS BEEN PLACED IN A TEST CHAMBER MAINTAINED AT105 ±3℃ FOR 16 HOURS , THE PRODUCT SHALL COMPLYVAC WITH THE REQUIREMENTS OF 4.7 , DIELECTRIC WITHSTAND TEST , SHALL HAVE INSULATION RESISTANCS NOT LESS THAN STATED BELOW AS MEASURED AT 500VDC 10 MEGOHMS MINIMUM BETWEEN THE INPUT AND THE OUTPUT, INPUT AND CASE TOGETHER , 10 MEGOHMS MINIMUM

	RESISTANCE TO MOISTURE	THE PRODUCT SHALL BY PLACED IN A TEST CHAMBER MAINTAINED AT 40 ± 2 ℃ AT 90% ~ 95% RELATIVE HUMIDITY FOR 6 HOURS . THEN , WHEN TESTING 10 MINUTES SAFTER THE PRODUCT IS TAKEN OUT FROM THE TEST CHAMBER AND WIPED DRY , THE PRODUCT SHALL COMPLY WITH THE REQUIREMENTS OF 4.7 DIELECTRIC WITHSTAND TEST , AND SHALL HAVE INSULATION RESISTANCE NOT LESS THAN STATED BELOW AS MEASURED AT 500VDC 10 MEGOHMS MINIMUM BETWEEN THE PRIMARY AND THE SECONDARY TOGETHER;10 MEGOHMS MINIMUM BETWEEN A SECONDRY THER SECONDRY AND TOGETHER.
SAFETY & EMC	SAFETY STANDARDS	UL62368 EN60335
	EMI	CISPR22 CLASS
	INSULATION	B
OTHERS	MTBF	THEVDESIGN AND CONSTRUCTION OF THIS PRODUCT EXHIBIT A MINIMUM MEAN TIME BETWEEN FAILURE OF 30000 HOURS FULL RATED LOAD OPERATION AT 25 ℃
CONNECTOR	PLUG	5.52.1, 5.52.5, RCA, XLR, XT60, M16, C14.
	CABLE	UL2464 18# 1M length