80W Lithium-ion Battery Charger

PRODUCT > Battery charger > 80W Lithium-ion Battery Charger

80W Lithium-ion Battery Charger

■ Features
·INPUT:100-240VAC 50/60Hz
·Output: 8.4-58.8V, 0.3-6A .
·Global certificates
·No load power consumption<0.21W
·Cooling by free air convection
·MTBF: 30000 hours
·Provide 3 years warranty
·Install fuses on both ends of the Input and Output for double safety
·Protections: Short circuit / Over load / Over voltage / Over temperature
·Meet CEC,DoE Level VI,Energy star.
·Certification: UL,ETL,CUL,GS,CE,BS,SAA,KC,PSE,CB,FCC,EMC,RoHS。

Model：

MCNT1265000 MCNT1684000 MCNT2103000 MCNT2523000 MCNT2942000 MCNT3362000 MCNT4202000 MCNT5461500

Product details

SPECIFICATION
OUTPUT	MODEL NO.	MCNT1265000 MCNT1266000	MCNT1684000 MCNT1685000	MCNT2103000 MCNT2104000	MCNT2523000	MCNT2942000	MCNT3362000	MCNT4202000‍‍‍‍‍	MCNT5461500
	OUTPUT VOLTAGE	7.5-12.6V	10-16.8V	12.5-21V	15-25.2V	17.5-29.4V	20-33.6V	25-42V	32.5-54.6V
	OUTPUT CURRENT	5 - 6A	4 - 5A	3-4A	3A	2A	2A	2A	1.5A
	OUTPUT POWER	75.6W	84W	84W	75.6W	58.8W	67.2W	84W	81.9W
	PFC (MIN.)	0.6	0.6	0.6	0.6	0.6	0.6	0.6	0.6
	RIPPLE & NOISE (max.)	150mVp-p	200mVp-p	250mVp-p	300mVp-p	350mVp-p	400mVp-p	500mVp-p	600mVp-p
INPUT	INPUT VOLTAGE	100 ~ 240VAC
	FREQUENCY	50 / 60Hz
	INPUT POWER	NO LOAD: 0.5W MAX AT INPUT 100-240VAC 50/60Hz . LOADING : 80W MAX , AT RATED OUTPUT .
	TEMPERATURE RISING	CASE 65 ℃ MAX FOR RATED OUTPUT
	EFFICIENCY (MIN)	88%
	DIELECTRIC WITHSTAND TEST	5mA 3000VAC FOR 60 SECOND BETWEEN INPUT AND OUTPUT INPUT AND CASE, AT AN ALTERNATIVE POTENIALS 5% HIGHER MAY BE APPLIED FOR 1 SECOND
PROTECTION	OVER LOAD	THE PRODCT INCLUDES CURRENT FUSE TYPE 250V 3A LOCATED WITHIN INPUT CIRCUIT
	SHORT CIRCUIT:	CAPABLE OF WITHSTANDING CONTINUOUS SHORT CIRCUIT AND RECOVER AUTOMATICALLY
ENVIRONMENT	WORKING TEMP	THE OPERATIN TEMPERATURE OF THE PRODUCT SHALL BY FROM -29 ℃ TO +45 ℃
	STORAGETEMPERATURE	THE STORAGE TEMPERATURE OF THE PRODUCT SHALL BY FROM -40 ℃ TO +75 ℃
	RESISTANCE TO HEAT	WHEN TESTED WITHIN 10 MINUTES AFTER PRODUCT HAS BEEN PLACED IN A TEST CHAMBER MAINTAINED AT105 ±3℃ FOR 16 HOURS , THE PRODUCT SHALL COMPLYVAC WITH THE REQUIREMENTS OF 4.7 , DIELECTRIC WITHSTAND TEST , SHALL HAVE INSULATION RESISTANCS NOT LESS THAN STATED BELOW AS MEASURED AT 500VDC 10 MEGOHMS MINIMUM BETWEEN THE INPUT AND THE OUTPUT, INPUT AND CASE TOGETHER , 10 MEGOHMS MINIMUM

	RESISTANCE TO MOISTURE	THE PRODUCT SHALL BY PLACED IN A TEST CHAMBER MAINTAINED AT 40 ± 2 ℃ AT 90% ~ 95% RELATIVE HUMIDITY FOR 6 HOURS . THEN , WHEN TESTING 10 MINUTES SAFTER THE PRODUCT IS TAKEN OUT FROM THE TEST CHAMBER AND WIPED DRY , THE PRODUCT SHALL COMPLY WITH THE REQUIREMENTS OF 4.7 DIELECTRIC WITHSTAND TEST , AND SHALL HAVE INSULATION RESISTANCE NOT LESS THAN STATED BELOW AS MEASURED AT 500VDC 10 MEGOHMS MINIMUM BETWEEN THE PRIMARY AND THE SECONDARY TOGETHER;10 MEGOHMS MINIMUM BETWEEN A SECONDRY THER SECONDRY AND TOGETHER.
SAFETY & EMC	SAFETY STANDARDS	UL62368 EN60335
	EMI	CISPR22 CLASS
	INSULATION	B
OTHERS	MTBF	THEVDESIGN AND CONSTRUCTION OF THIS PRODUCT EXHIBIT A MINIMUM MEAN TIME BETWEEN FAILURE OF 30000 HOURS FULL RATED LOAD OPERATION AT 25 ℃
CONNECTOR	PLUG	5521, 5525, RCA, XLR, XT60, M16, C14.
	CABLE	UL2464 18# 1M length