24W Lithium-ion Battery Charger

PRODUCT > lithium-ion battery charger > 24W Lithium-ion Battery Charger

24W Lithium-ion Battery Charger

■ Features
·INPUT:100-240VAC 50/60Hz
·Output: 8.4-25.2V, 0.3-2A .
·Global certificates
·No load power consumption<0.21W
·Cooling by free air convection
·MTBF: 30000 hours
·Provide 3 years warranty
·Install fuses on both ends of the Input and Output for double safety
·Protections: Short circuit / Over load / Over voltage / Over temperature
·Meet CEC,DoE Level VI,Energy star.
·Certification: UL,ETL,CUL,GS,CE,BS,SAA,KC,PSE,CB,FCC,EMC,RoHS。

Model：

MCNT0842000 MCNT1262000 MCNT1681000 MCNT2101000 MCNT2521000 MCNT2940800

SPECIFICATION
OUTPUT	MODEL NO.	‍ MCNT0840200	MCNT1260200	MCNT1680100	MCNT2100100	MCNT2520100	MCNT2940080
	OUTPUT VOLTAGE	8.4V	12.6V	16.8V	21V	25.2V	29.4V
	OUTPUT CURRENT	2A	2A	1A	1A	1A	0.8A
	OUTPUT POWER	16.8W	25.2W	16.8W	21W	25.2W	23.52W
	PFC (MIN.)	0.6	0.6	0.6	0.6	0.6	0.6
	RIPPLE & NOISE (max.)	100mVp-p	150mVp-p	200mVp-p	250mVp-p	300mVp-p	350mVp-p
INPUT	INPUT VOLTAGE	100 ~ 240VAC
	FREQUENCY	50 / 60Hz
	INPUT POWER	NO LOAD: 0.5W MAX AT INPUT 100-240VAC 50/60Hz . LOADING : 80W MAX , AT RATED OUTPUT .
	TEMPERATURE RISING	CASE 65 ℃ MAX FOR RATED OUTPUT
	EFFICIENCY (MIN)	88%
	DIELECTRIC WITHSTAND TEST	5mA 3000VAC FOR 60 SECOND BETWEEN INPUT AND OUTPUT INPUT AND CASE, AT AN ALTERNATIVE POTENIALS 5% HIGHER MAY BE APPLIED FOR 1 SECOND
PROTECTION	OVER LOAD	THE PRODCT INCLUDES CURRENT FUSE TYPE 250V 3A LOCATED WITHIN INPUT CIRCUIT
	SHORT CIRCUIT:	CAPABLE OF WITHSTANDING CONTINUOUS SHORT CIRCUIT AND RECOVER AUTOMATICALLY
ENVIRONMENT	WORKING TEMP	THE OPERATIN TEMPERATURE OF THE PRODUCT SHALL BY FROM -29 ℃ TO +45 ℃
	STORAGETEMPERATURE	THE STORAGE TEMPERATURE OF THE PRODUCT SHALL BY FROM -40 ℃ TO +75 ℃
	RESISTANCE TO HEAT	WHEN TESTED WITHIN 10 MINUTES AFTER PRODUCT HAS BEEN PLACED IN A TEST CHAMBER MAINTAINED AT105 ±3℃ FOR 16 HOURS , THE PRODUCT SHALL COMPLYVAC WITH THE REQUIREMENTS OF 4.7 , DIELECTRIC WITHSTAND TEST , SHALL HAVE INSULATION RESISTANCS NOT LESS THAN STATED BELOW AS MEASURED AT 500VDC 10 MEGOHMS MINIMUM BETWEEN THE INPUT AND THE OUTPUT, INPUT AND CASE TOGETHER , 10 MEGOHMS MINIMUM

	RESISTANCE TO MOISTURE	THE PRODUCT SHALL BY PLACED IN A TEST CHAMBER MAINTAINED AT 40 ± 2 ℃ AT 90% ~ 95% RELATIVE HUMIDITY FOR 6 HOURS . THEN , WHEN TESTING 10 MINUTES SAFTER THE PRODUCT IS TAKEN OUT FROM THE TEST CHAMBER AND WIPED DRY , THE PRODUCT SHALL COMPLY WITH THE REQUIREMENTS OF 4.7 DIELECTRIC WITHSTAND TEST , AND SHALL HAVE INSULATION RESISTANCE NOT LESS THAN STATED BELOW AS MEASURED AT 500VDC 10 MEGOHMS MINIMUM BETWEEN THE PRIMARY AND THE SECONDARY TOGETHER;10 MEGOHMS MINIMUM BETWEEN A SECONDRY THER SECONDRY AND TOGETHER.
SAFETY & EMC	SAFETY STANDARDS	UL62368 EN60335
	EMI	CISPR22 CLASS
	INSULATION	B
OTHERS	MTBF	THEVDESIGN AND CONSTRUCTION OF THIS PRODUCT EXHIBIT A MINIMUM MEAN TIME BETWEEN FAILURE OF 30000 HOURS FULL RATED LOAD OPERATION AT 25 ℃
CONNECTOR	PLUG	5521, 5525, RCA, XLR, XT60, M16, C14.
	CABLE	UL2464 18# 1M length
‍PACKING	SIZE	764431 CM
	WEIGHT	0.18kg