300W LiFePO4 Battery Charger

PRODUCT > LiFePO4 battery charger > 300W LiFePO4 Battery Charger

300W LiFePO4 Battery Charger

■ Features
·INPUT:100-240VAC 50/60Hz
·Output: 8.4-58.8V, 0.3-15A
·Global certificates
·No load power consumption<0.21W
·Cooling by free air convection
·MTBF: 30000 hours
·Provide 3 years warranty
·Install fuses on both ends of the Input and Output for double safety
·Protections: Short circuit / Over load / Over voltage / Over temperature
·Meet CEC,DoE Level VI,Energy star.
·Certification: UL,ETL,CUL,GS,CE,BS,SAA,KC,PSE,CB,FCC,EMC,RoHS。

Model：

MCNT14615000 MCNT2929000 MCNT29210000 MCNT4386000 MCNT5475000 MCNT5845000 MCNT7304000 MCNT8763000

Product details

SPECIFICATION
OUTPUT	MODEL NO.	MCNT14615000	MCNT2929000	MCNT29210000	MCNT4386000	MCNT5475000	MCNT5845000	MCNT7304000	MCNT8763000‍‍‍‍‍
	OUTPUT VOLTAGE	8-14.6V	16-29.2V	16-29.2V	24-43.8V	30-54.75V	32-58.4V	40-73V	48-87.6V
	OUTPUT CURRENT	15A	9A	10A	6A	5A	5A	4A	3A
	OUTPUT POWER	219W	262.8W	292W	262.8W	274W	292W	292W	262.8W
	PFC (MIN.)	0.9	0.9	0.9	0.9	0.9	0.9	0.9	0.9
	RIPPLE & NOISE (max.)	150mVp-p	300mVp-p	300mVp-p	500mVp-p	600mVp-p	700mVp-p	800mVp-p	900mVp-p
INPUT	INPUT VOLTAGE	100 ~ 240VAC
	FREQUENCY	50 / 60Hz
	INPUT POWER	NO LOAD: 0.5W MAX AT INPUT 100-240VAC 50/60Hz . LOADING : 100W MAX , AT RATED OUTPUT .
	TEMPERATURE RISING	CASE 65 ℃ MAX FOR RATED OUTPUT
	EFFICIENCY (MIN)	88%
	DIELECTRIC WITHSTAND TEST	5mA 3000VAC FOR 60 SECOND BETWEEN INPUT AND OUTPUT INPUT AND CASE, AT AN ALTERNATIVE POTENIALS 5% HIGHER MAY BE APPLIED FOR 1 SECOND
PROTECTION	OVER LOAD	THE PRODCT INCLUDES CURRENT FUSE TYPE 250V 3A LOCATED WITHIN INPUT CIRCUIT
	SHORT CIRCUIT:	CAPABLE OF WITHSTANDING CONTINUOUS SHORT CIRCUIT AND RECOVER AUTOMATICALLY
ENVIRONMENT	WORKING TEMP	THE OPERATIN TEMPERATURE OF THE PRODUCT SHALL BY FROM -29 ℃ TO +45 ℃
	STORAGETEMPERATURE	THE STORAGE TEMPERATURE OF THE PRODUCT SHALL BY FROM -40 ℃ TO +75 ℃
	RESISTANCE TO HEAT	WHEN TESTED WITHIN 10 MINUTES AFTER PRODUCT HAS BEEN PLACED IN A TEST CHAMBER MAINTAINED AT105 ±3℃ FOR 16 HOURS , THE PRODUCT SHALL COMPLYVAC WITH THE REQUIREMENTS OF 4.7 , DIELECTRIC WITHSTAND TEST , SHALL HAVE INSULATION RESISTANCS NOT LESS THAN STATED BELOW AS MEASURED AT 500VDC 10 MEGOHMS MINIMUM BETWEEN THE INPUT AND THE OUTPUT, INPUT AND CASE TOGETHER , 10 MEGOHMS MINIMUM

	RESISTANCE TO MOISTURE	THE PRODUCT SHALL BY PLACED IN A TEST CHAMBER MAINTAINED AT 40 ± 2 ℃ AT 90% ~ 95% RELATIVE HUMIDITY FOR 6 HOURS . THEN , WHEN TESTING 10 MINUTES SAFTER THE PRODUCT IS TAKEN OUT FROM THE TEST CHAMBER AND WIPED DRY , THE PRODUCT SHALL COMPLY WITH THE REQUIREMENTS OF 4.7 DIELECTRIC WITHSTAND TEST , AND SHALL HAVE INSULATION RESISTANCE NOT LESS THAN STATED BELOW AS MEASURED AT 500VDC 10 MEGOHMS MINIMUM BETWEEN THE PRIMARY AND THE SECONDARY TOGETHER;10 MEGOHMS MINIMUM BETWEEN A SECONDRY THER SECONDRY AND TOGETHER.
SAFETY & EMC	SAFETY STANDARDS	UL62368 EN60335
	EMI	CISPR22 CLASS
	INSULATION	B
OTHERS	MTBF	THEVDESIGN AND CONSTRUCTION OF THIS PRODUCT EXHIBIT A MINIMUM MEAN TIME BETWEEN FAILURE OF 30000 HOURS FULL RATED LOAD OPERATION AT 25 ℃
CONNECTOR	PLUG	5521, 5525, RCA, XLR, XT60, M16, C14.
	CABLE	UL2464 16# 1M length

Online Message

Name

Phone

Corporate name

Address

Leaving Message*

Submit

Previous： 24W Switching mode power supply

Next： 200W LiFePO4 Battery Charger

Return

TOP

QQ客服

0769-26386845

mcntpower

info@mcnt.cn