SP17S005 smart bms is a software bms specially designed for 10~17 series lithium battery packs. SP17S005 supports LiFePO4 and Li-ion batteries, while also supporting continuous currents of 20A to 120A. The whole system adopts O2 front-end acquisition chip + Bluetooth MCU scheme, and some parameters can be flexibly adjusted through the upper computer according to the needs of customers.



Parameter of SP17S005 Smart BMS - 36V 48V 60V LiFePo4 Li-ion BMS

SP17S005 Battery Protection Board‘s Functions

Function Configuration Function Configuration

Automatic Identify Strings Number

The SP17s005 BMS can achieve automatic recognition of 10 to 17 strings, making wiring easier and more convenient.

Line insertion order: first plug in the high-end cable, and then plug in the low-end cable, if the low-end line is inserted first, the high-end cable is not inserted within 5 seconds, the protection board can not recognize the voltage of the high-end string, only the voltage of the low-end string can be recognized, at this time you need to reseat the cable.



Communication Functions

SP17S005 smart bms supports two communication methods, Bluetooth and uart.

The connection method is: after installing the special driver for our communication box on the computer side, insert the USB end of the communication box into the USB port of the computer, and connect the other end to the corresponding interface of the protective board that has been connected to the battery. Open the host computer, click the communication port settings, select the CMO port corresponding to the communication box, other options

do not move, after confirmation, click Start, you can read the protected data. If you need to change the parameters of the protection plate, you must first click Read Parameters on the Parameters page before changing the parameters.